DELFIN - CHEMICAL END SUCTION PROCESS PUMP

Delfin End Suction Centrifugal Pump Back Pull Out designed accordance with ISO 2858 1975 (E) International Standard.

Performance

• Flow range : up to 400m3/H
• Discharge pressure : up o 125 m
• Diameter of suction : 50 mm up to 200mm
• Temperature : -200oC up to 180oC
• Maximum speed : 3500rpm

Material of Pump
Standard Optional

• Casing St. Steel SUS 316 -
• Impeller St. Steel SUS 316 -
• Shaft St. Steel SUS 316 -
• Shaft seal Mechanical Seal Packing
• Gasket Teflon -
  

The standard seal is Teflon seal with SIC vs Carbon, other material of seals are on requested and configuration of seal (double seal, flushing, quenching etc).

CENTROFLO - CENTRIFUGAL END SUCTION ALL STAINLESS STEEL

• Stamping Centrifugal Process Pump All Stainless Steel
• Horizontal Single Stage End Suction Back Pull Out

Special Featuring
Advance Manufacturing Technology
The Centroflo is precision-engineering Stamping Centrifugal process pumps designed and manufactured to withstand the most demanding pumping application. Using advanced manufacturing and stamping technology, the Centroflo pumps are made from thick Stainless Steel Plate for Ultimate chemical resistance and durability.

The Superior lightweight construction and consistence in material quality has made Centroflo emerge as the preferred pumps over the traditional cast stainless steel pumps on weight, pitting and crevice corrosion problem. The inherent smooth metal surface allows the pumps to achieve excellent hydraulic performance.


TECHNICAL DATA
The Centroflo pumps are being manufactured in accordance to ISO 2858-DIN 24256. All pumps have been designed to modular concept to allow high parts intercangeability to simplify maintenance and spare part inventory.

PERFORMANCE
Capacity : 3.2 m3/hr - 600 m3/hr
Discharge Pressure : up to 125 meter
Operating Temperature : -20oC to 180oC
Maximum Suction Pressure : 0.5 Mpa
Maximum Working Pressure : 2.0 Mpa

APPLICATION
Centroflo Pumps are designed to handle various liquid in chemicals industry, Waste Water Industry, Electronic Industry, Pharmaceutical Industry, Paper Mills Industry, Palm Oil Industry, Textile Industry, Food and Beverage Industry, Sugar Plants, Oil and Pat Industry, Dairy Industry..

GENERAL

• The General series fully conforms to the pumps standard DIN 24256-ISO 2858
• All Pumps are mounted on the standard bearing assemblies given high part interchangeability to simplify maintenance and spare part inventory

DESIGN FEATURE

• Volute Casing. Stamped and manufactured from high grade Stainless Steel material with foot mounting and vertical centerline discharge for automatic self-venting
• Impeller. Both closed and Semi-Opened impeller are made of thick stainless steel plate to suite different application.
• Gland Packing and Mechanical Seal. Available in Gland Packing and Mechanical Seal configuration, and material combination to suite various application.
• Robust bearing Housing. Cast from high Grade Cast Iron for maximum stability and corrosion resistance.
• Angular Contact Bearing. Heavy duty, self aligning angular contact ball bearings, widely spaced on shaft offer maximum stability and long life.
• Back Pull Out Features. Allow the whole rotating element to be removed for service and repair without disturbing pipe works.
  

CENTROFLO - HEAVY DUTY CLOSED COUPLED CENTRIFUGAL PUMP

SPECIAL FEATURES

Advance Manufacturing Technology

The Centroflo is precision-engineering hydraulically pressed heavy duty centrifugal pumps design and manufactured to withstand the most demanding application. Using advance manufacturing tecnology. The centroflo pumsare made from thick stainless steel plate for ultimate chemical resistance, stability and durability.

The superion light weight construction and consistency in material quality from stainless steel plate have made the centroflo emerges as the preferred pumps over the traditional cast stainless steel pumps on weight, pitting and crevice corrosion problem. The inherrent smooth metal service allow the pumps to achieve excellent hydraulic performance.

Thechnical Data

The CCS Series Closed Coupled Centroflo Pumps inherit the design standardof ISO 2858 process centrifugal pump. All pumps have been designed and manufactured to higher stmaintenance and spare part standard with modular concept to allow high parts interchangeability to simplify maintenance and spare part inventory.

Performance

Capacity : Up to 60M3/H

Discharge : Up to 55 M

Operating Temperature : Up to 150oC

Max. Suction Pressure : 0.5 MPa

Max. Working Pressure : 1.2 MPa

VANTON THERMOPLASTIC PUMP - FOR COROSIVE, ABRASIVE, HAZARDOUS AND ULTRAPURE FLUIDS

CHEM-GARD®

Horizontal Centrifugal Pumps

These heavy-duty and rugged horizontal centrifugal pumps are designed, engineered and constructed to handle corrosive, abrasive and other aggressive fluids, as well as those liquids which must remain free of metallic contamination. CHEM-GARD® pumps are available in a wide selection of thermoplastics and in ANSI/DIN, self-priming, close-coupled and integral pump/shaft motor designs.

Their unique sliding front bearing design assures minimum shaft overhang, simplifies maintenance, and allows all types of mechanical seals to be utilized. Vanton's unique reverse-mounted seal arrangement avoids metal contact with fluid and eliminates need for exotic metal seals. Rated for flows to 1450 gpm (330 m³/hr), heads to 400 feet (122 meters), and for use at temperatures to 275°F (135°C).

CG thermoplastic centrifugal pump is metal armored
The Vanton CHEM-GARD CG design was the first horizontal centrifugal pump engineered from inception to utilize the unique characteristics of thermoplastics. It is not a metal pump made of nonmetallics. Design features include molded plastic components, tangential discharge, wide open seal area and retractable front bearing to simplify maintenance and accommodate all popular mechanical seals. CGA centrifugals meet ANSI and DIN standards for process pumps
These end suction pumps combine centerline discharge and back pullout construction with the CHEM-GARD wide open seal, sliding bar pedestal design. They meet ANSI B-73.1 and international process pump standards. Metal armoring of the plastic casing and flanges enables these thermoplastic pumps to handle the same nozzle loadings as metal pumps.

CGA centrifugals meet ANSI and DIN standards for process pumps
These end suction pumps combine centerline discharge and back pullout construction with the CHEM-GARD wide open seal, sliding bar pedestal design. They meet ANSI B-73.1 and international process pump standards. Metal armoring of the plastic casing and flanges enables these thermoplastic pumps to handle the same nozzle loadings as metal pumps.

CGM sealless ANSI centrifugals feature magnetic drive
Vanton magnetically driven ANSI pumps are ideal for handling corrosive, and hazardous fluids. They are constructed with a dual nonmetallic containment can assembly: PTFE for the inner can in contact with the process liquid, backed by a rugged FRP outer can. This innovative design minimizes troublesome eddy currents. The pump conforms to Hydraulic Institute Standards and offers an air cooled, dry running, tertiary seal. Flows to 450 gpm (102 m³/hr), heads to 280 feet (85 m).

CGC closed-coupled pump offers compact size, economy, purity
The CHEM-GARD CGC close-coupled, thermoplastic pump sees wide use in clean room applications. It offers a small footprint, and limits fluid contact parts to natural, unpigmented PVDF or polypropylene to avoid contamination. CGC pumps are often specified by original equipment manufacturers as an integral component on standard systems because they accommodate any C-face motor, and are available in chemically inert thermoplastics at relatively low cost for flows to 550 gpm (125 m³/hr) at heads to 220 feet (67 m).

PUMPER PART

Replacement Parts for AOD Pumps

Pumper Parts is your single source for parts that fit Air-Operated Double Diaphragm (AODD) pumps, including Wilden®, ARO®, and Yamada®. Recognized as the industry leader in AODD repair parts, Pumper Parts offers an expanding product line to meet your needs. Most parts are sold at 20% below the manufacturers' list price.

Pumper Parts' products are available in materials such as synthetic rubbers, injection-molded thermoplastics, and Teflon®, which make our parts compatible with a variety of liquids.

ROBUSCHI - CHEMICAL PROCESS PUMPS WITH OPEN IMPELLER

RKN SERIES

The RKN Pumps are single stage centrifugal pumps with axial inlet, manufactured to grant a "back pull out" disassembly. The RKN line is covered by one bearing brackets.

Field of Application

Because of the recessed open impeller designed with wide crossed section between blades it is possible to pump, without any clogging problem, solution with crystals, muddy and/or viscous liquids, with particles or fibrous materials chemically inert or aggressive.

The RKN pumps are suitable in chemical and petrochemical industry, in steelworks, in sewage treatment plant, in paper and sugar industry, in pharmaceutical industry, in textile and food processing industry and shipyards.

Operating Limits

• Capacity Q up to 70 m3/h
• Head H up to 60 m
• Pressure p up to 16 bar
• Temperature t from -50 up to +280°C
• Diameter DN from 32 to 50 mm

Design Features

Bearing Bracket

Drive end bearings are oil lubricated selected for long life and reability.

Drive Shaft Seals

The RKN pumps have soft gland packing seal flushed by external clean fluid. In order to assure operation with different liquids, a wide range of mechanical, double, tandem or single seal are provided.

Flush and quench piping plans for mechanical seals are design in compliance with API standard 610.

JOHNSON - LOBE PUMP

Contact : PT. Tangga Mas Rukan Taman Meruya Blok M 25 Meruya Utara, Jakarta 11620 Phone : (021) 5874240-42 Fax : (021) 5874238 E-Mail : sales@tanggamas.com Website : www.tanggamas.com The NEW Classic+ combines a proven design with extraordinary features to produce a lobe pump ideally suited for today's demanding applications requiring a traditional lobe pump.
With 316L Stainless Steel product-wetted parts, sanitary design, and low-shear flow, the Classic+ meets the demand for high product quality, reliability, and service. Being of a design proven over many years, the Classic+ offers superior reliability in a wide range of applications.
Designed and manufactured using the latest computer aided design, manufacture, test, and inspection techniques, several innovative Johnson features have been incorporated within the product. These result in the Classic+ range being ideally suited to both continuous and intermittent transfer or process applications, offering a wide range of displacements. Every Classic+ model offers smooth flow, positive self priming pumping action, dry running, and reverse flow ability with low agitation or shear.

Classic+ has the benefit of being universal mounting. The bolt on feet allow the ports to be aligned either horizontally or vertically to suit application requirements. The rotorcase profile and geometry allows for complete self draining of the pump when mounted with the ports in the vertical position.

Classic+ has options for enlarged ports, seals, drives, and jacketing enabling it to interface with a wide variety of process requirements and plant technologies.

Available with a complete range of reliable high quality, mechanical seals, the Classic+ has single, single flushed and double seals with a variety of seal faces to suit all applications.

Alternateively, there is a simple front loading 'O' ring seal, ideal for lubricating liquids and where strip cleaning is used.

This new pump will replace the existing Classic Pump in early 2007. For those with existing Classic units, there will be continued supply of service as parts used in the new Classic+ are interchangeable with parts used in the original pump.

CLASSIC+ RANGE ROTARY LOBE PUMP OPERATING PARAMETERS
CP	Classic+ Model	Displacement				Maximum	Maximum	Maximum
				Standard			Speed at	Differential
Series				Connection		Speed	Maximum	Pressure at
				Size			Differential	Maximum
							Pressure	Speed
		Litres /	US Gal /	mm	Inches	Rev /	Rev /	BAR	PSI
		rev	100 rev			min	min
10	CP10/0005/12	0.046	1.22	25	1	1,400	1,000	8.5	120
	CP10/0008/08	0.083	2.19	40	1.5	1,400	1,000	5.5	80
	CP10/0011/05	0.111	2.93	40	1.5	1,400	1,000	3.5	50
20	CP20/0020/12	0.202	5.34	40	1.5	1,000	750	8.5	120
	CP20/0031/07	0.313	8.27	50	2	1,000	750	5	70
30	CP30/0069/12	0.694	18.34	50	2	750	550	8.5	120
	CP30/0113/07	1.125	29.72	80	3	750	550	5	70
40	CP40/0180/12	1.8	47.56	80	3	700	520	8.5	120
	CP40/0250/07	2.5	66.05	100	4	700	520	5	70
50	CP50/0351/12	3.514	92.84	100	4	650	420	8.5	120
	CP50/0525/08	5.25	138.71	150	6	600	420	5.5	80
*For pressures greater than those stated, refer to Wright Flow Technologies Limited sales office

DAVID BROWN - INDUSTRIAL GEAR BOX (SERIES G)

Contact :
PT. Tangga Mas
Rukan Taman Meruya Blok M 25
Meruya Utara, Jakarta 11620

Phone : (021) 5874240-42
Fax : (021) 5874238
E-Mail :
sales@tanggamas.com
Website :
www.tanggamas.com
The Series G helical industrial gearboxes have been introduced to meet the requirements of today's demanding applications in the medium and heavy-duty sector of the power transmission market. Innovative modular design technology has minimized manufactured part count to maximize availability of product.

Product Specification

Gear tooth geometry design combines maximum efficiency with high load carrying capacity and minimal noise generation. Serviceability of the product was key in the design of the Series G range allowing easy maintenance for long life and reliability, which are synonymous with our field reputation.

• Unit Sizes: 14, 15, 16, 17, 18, 19, 21 and 22
• Input Power: Up to 1,860 kW (2,494 HP)
• Output Torque: Up to 162,000 Nm (1,433,821 lb.in.)
• Gear Ratios: Up to 315:1 in two stages and up to 70,000:1 in combined form
• Output Shaft:Up to 240mm (9.45 in.)
• Motor Sizes: IEC Frames from 200 to 315; NEMA Frames from 254 to 445

Features & Benefits

This product takes advantage of our many years of accumulated design expertise together with the use of high quality materials and components, and has the following features & benefits:

• Case hardened and ground helical gears, and hard finished spiral bevel gears have optimised gear geometry to maximise strength and efficiency, and to minimise noise and vibration.
• Horizontal split case design for ease of maintenance.
• Large diameter output shaft and bearings to maximize overhung load capacity.
• Innovative modular construction has minimised part count to maximise availability of product.

CENTRIFUGAL PRICE PUMP

Contact :
PT. Tangga Mas
Rukan Taman Meruya Blok M 25
Meruya Utara, Jakarta 11620

Phone : (021) 5874240-42
Fax : (021) 5874238
E-Mail :
sales@tanggamas.com
Website :
www.tanggamas.com

Price Pump Company is a leading manufacturer of 50 & 60 Hz Centrifugal Pump. Our pumps are suitable for liquids ranging from water, oil, and chemicals to strong acid or alkaline solutions. Our pumps offer dependability and quality at a very competitive price.

Price Pump Model - OH75

Close Coupled Plastic Horizontal Centrifugal Pump

Flows to 60 GPM / Heads to 160 feet

Sizes:

OH75 -3/4" x 1" x 6"

Materials:

OH75 CP (Natural CPVC)

OH75 PF (Natural PVDF)

Applications:

• Sump Pumping
• Electronics
• Photo Processing
• Water Treatment
• Acid transfer
• Chillers
• Metal etching
• Recirculating

Features:

• All non-metallic wetted parts
• True volute design for high efficiency and betterperformance
• Compact close coupled design
• Standard NEMA 56C motors
• Optional power frame available
• Unique sleeved impeller design
• Mechanical seal: 1" Type 36 Flourocarbon non-metallicseal standard
• Optional seals available

Price Pump Model - CD

Close Coupled Horizontal and Vertical Centrifugal Pumps

Flows to 160 GPM / Heads to 100 feet

Sizes:

CD100-1" x 1-1/4" x 5"

CD 150-1-1/2" x 2" x 5"

Materials:

316 Stainless Steel

Cast Iron

All Bronze

Cast Iron/Bronze Fitted Impeller

Applications:

Industry-Chemical process, deionized water, wastewater treatment, hot solvents, and caustics

O.E.M. - Washers, filters, chillers, cooling towers, scrubbers, plating equipment

Agriculture-Acid fertilizers and other agricultural chemicals

Features:

Close Coupled design using standard NEMA 56C motors

Optional power frame available

Mechanical seal: JohnCrane 5/8" Type 21 Flourocarbon standard, Type 9 PTFE and Type 21 Flourocarbon double seal available

Optional seal face materials and elastomers available

Seal flush and seal quench optional Price Pump Model - XL/XT Close Coupled Closed-Impeller Horizontal Centrifugal Pump Flows to 400 GPM / Heads to 136 feet Sizes: XL100-1" x 1-1/2" x 6" XL150-1-1/2" x 3" x 6" XL200-2" x 3" x 6" XT100-1" x 1-1/2" x 6" XT150-1-1/2" x 2" x 6" XT200-2" x 3" x 6" Materials: XL (Centerline Flanged) (316SS only) XT (Centerline Threaded) (316SS, Cast Iron, and All Bronze and Cast Iron Bronze Fitted) Applications: Industry-Chemical process, Deionized water, Water and wastewater treatment, Hot solvents, Caustics OEM-Washers, Filters, Chillers, Cooling towers, Scrubbers, Plating equipment Agriculture-Acid Fertilizers and other agricultural chemicals Features:: Standard NEMA JM motors; ODP, TEFC, XP... 56C also available Mechanical seal: 1-1/2" Type 21 Fluorocarbon, carbon vs. ceramic standard. Type 9 PTFE and Type 21 Fluorocarbon double seal optional Seal flush and seal quench optional Optional power frame available Close coupled through -- horsepower Replaceable shaft sleeve 150 lb. centerline ANSI dimensioned flanges Available NPT connections

DELFIN SEAL

Contact :
PT. Tangga Mas
Rukan Taman Meruya Blok M 25
Meruya Utara, Jakarta 11620

Phone : (021) 5874240-42
Fax : (021) 5874238
E-Mail : sales@tanggamas.com
Website : www.tanggamas.com

• Material available : Carbon (C), Silicon Carbide (SiC), Tungsten Carbide (TC), Ceramic, dan Stainless steel.
• Elastomer's material vailable in : Buna, Viton, serta PTFE.
• Size : 18 mm up to 48 mm
• Application : transfer pumps, agitator, mixer, etc.